Budan

Espresso Machine

How to setup: Plug in your espresso machine and add filtered water in the detachable reservoir tank at the back. Press the switch on button on your coffee machine, the display button will blink till the machine is heating up. Once the coffee machine is ready to use, it will display “00” on the display. Your machine is now ready to make amazing cups of coffee. How to clean your Budan Espresso Machine: On a daily basis it’s important to wipe down the porta filter, group head and steam wand of your coffee machine. For deep cleaning of your coffee machine (at least once in two weeks) the group head and milk steaming wand should be cleaned using appropriate coffee machine cleaning chemicals. Back flushing the Espresso Machine is best done when the machine is hot Using the group head brush, clean the screen thoroughly to remove any coffee grounds. Place the blind disc in your porta filter and add one cafiza tablet to it. Load it to the group head. Press manual brew button and let it run full cycle, repeat this process three times. After this, remove the porta filter and run water through the group head to rinse, then reload the rinsed porta filter into the group head and repeat the process 3 times without any chemical. Empty out the drain tray and rinse it under running water. For the steam wand, add a cap of rinza liquid to half a pitcher of room temperature water and start the steam wand till the water warms up. Remember to dispose an espresso shot the next time you brew as it might have some chemical residue.